•Wall-mounted frame with rear panel, 3-point rod lock with swing handle (prepared for half cylinder mounting)
•Material: 1.5 mm powder-coated sheet steel
• Phosphated, plastic powder-coated sheet steel enclosure tested and certified according to EN 62208:2011 and EN 60529:1991, protection class I suitable for TT/TN and IT network form, protection insulated according to ÖVE-IM 12
•Available in sizes from 2A/12 to 5A/42 Modul-high enclosures in the graded depths of 250, 300 and 400 mm
•Number of gland plates see technical table
•The cable entry can be made either from above or below, the cabinet can be rotated by 180 °. Supplied with blind flanges
•All components can be installed from standard Modul 2000
•It is also possible to use a mounting plate IL959xxx
•rated voltage Ue: 230/400V/50Hz
•rated insulation voltage Ui: 1000V
•rated impulse withstand voltage Uimp: 6kV
•rated short time withstand current Icw: 25kA / 1s
•rated peak withstand current Ipk: 54kA
•rated conditional short-circuit current Icc: 25kA
•Protective earth connection: Welded bolt M6, I²t=3,6x10⁶ A²s
•Protection class: I
•Ambient temperature: -5 to +40°C
•Relative humidity: 50% at +40°C
•Max. allowed load capacity: Use 150kg floor-mounted / Use 80kg wall-mounted (without additional supports) / door 10kg
•EMV: EMV Environment 1
•Degree of protection: IP54
•Impact resistance: IK08
•Color: RAL7035 (Light grey)