These TOOLLESS LINE jacks RJ45 are modules in Schrack Format A (SFA). The jack HSEMRJ6GWA fullfills Cat.6a performance for 10 Gigabit Ethernet. It is a toolless jack and can be crimped without the need of a special tool. This results in a very convenient installation procedure and very short installation time needed. Enhanced electro magnetic compliance (EMC) performance is achieved by the 360° spring-type shielding-contact and optimised overlapping of the bodyparts. The jack comes with a Fast-On connector for connection to an earthing-point and can be re-opened if needed.

• Electrical characteristics: Category 6_A (ISO/IEC) 500 MHz 10 Gb/s
• Standards:
  • ISO/IEC 11801 Amendment 2 (2010-04)
  • IEC 60603-7-51 Ed.1 (IEC 48B /1977/CDV, (2008.12)
  • IEEE 802.3an TM-2006
  • EN 55022 EMC
  • IEC 60512-4-1DC voltage proof
• Contact cycles (Jack/Patchcord): ≥1000
• Re-Connecting (Jack / Installation cable with same wire gauge): ≥20
• Configuration: 1-2, 3-6, 4-5, 7-8
• Gold-plating of contacts: 50 µ-inch
• GHMT certified
• Module made from 2 parts only
• Housing: Zinc-alloy, 100% shielded
• 360° Shielding, spring-type
• Wire contacting via IDC self-stripping terminals with color-coded (EIA/TIA 568A and B) wire recess
• Toolless installation (no special LSA tool required)
• Earthing contact (Fast-On) at back of housing
• Module can be re-opened and re-installed
• Cables to be used: wire-diameter from AWG 26 – AWG 22 (Solid and stranded)
• New termination possible if wire diameter ≥ wire diameter at first termination. (Example: first termination with AWG24: new termination possible with AWG24, AWG23 or AWG22)
• Dust-cover (white) included in package. Other colors (Red, Blue, Yellow, Black) optionally available: HSEMRJZSKx
• Module to be used in TOOLLESS LINE patchpanels and outlets
• 4PPoE capable