REPAIRKIT / CABLE EXTENDER
By use of the Cat.6A cable extender cables can be extended without much effort. Furthermore, unused cables can be reactivated and extended until the next wanted connection point.
The limited space in the cable-duct is optimally used. The installer fixes the extender just at the end of the installed cable in the cable-duct or on the wall.
After installation, the so-extended line can be used up to the maximum link length even for 10-Gigabit Ethernet transmissions and supports PoE+ (Power over Ethernet).
Standards
- IEE 802.3; 10Base-T; 100Base-T; 1GBase-T; 10GBase-T;
- IEEE 802.5; 16 MB; ISDN; ATM, Telefon
Environmental Requirements
- Degree of Protection: IP 20
- Temperature Range: from -40°C to +70°C
Features
- Housing material: Zinc Die Cast, Nickel
- Material Insulators: PC aqua
- Gold plating in contact area: 30 µ"
- Contact: AWG 24-22
- Cable diameter: 5 - 9,5 mm
- Assembly: Screw
- EMC: 360°-Shielding
- Electrical Performance: Cat. 6A, the extended Link: Class EA
- Length: Linklength up to 90 m
- Linkextension: without additional twist in the cable
- Pacakge Unit: 1 piece in a polybag
Electrical Properties
- Contact Resistance: ≤ 20 mΩ
- Insulation resistance between the contacts: 500 MΩ
- Dielectric strength Contact - Contact: 1000 V DC/AC peak
- Dielectric strength Contact - Shield: ≥ 1500 V DC/AC peak
- Current rating at 50°C: 1,25 A
- PoE+ according IEEE 802.3at: PoE+
Transmission Characteristics
- 10 Gbit: is supported
- Cat 6A: ISO/IEC 11801
| EAN-Code | 9004840268102 |
|---|---|
| Net length | 65,60mm |
| Net width | 15,60mm |
| Net height | 13,50mm |
| Net weight | 0,04kg |
| Min. ambient temperature | -40°C |
| Max. ambient temperature | 70°C |
| Accessories | Repair-Kit |
| Manufacturer | Schrack |
| - | Sommeroffer |
| Packaging units | 1 pcs |
