SCHRACK-Info
Mainly used in offices and office-like environments, such as flats, single-family homes, etc. Suitable as a central distributor in small to medium-sized network installations, but also for use as a floor distributor (sub-distributor) in the horizontal area of structured cabling. The removable side panels allow convenient access to the installed components, even afterwards. For active cooling of the built-in components, optional DTLT fan units with one or two fans can be mounted in the roof.
One-man installation: A special feature of the DTWB enclosure is the convenient and quick one-man installation.
In the first step, the rear panel is removed from the enclosure and only this panel is fixed to the wall. Afterwards, the enclosure is only hung into the back wall and fixed. These operations can easily be carried out by a single fitter on the building site.
•Material: Powder-coated steel sheet housing
•Material thickness:
- Top and bottom chassis: 1.2mm
- Corner profile: 1.2mm
- Rails: 1.5mm
- Front door glass: 4.0mm
- Rear panel: 1.5mm
- Side panel: 0.8mm
•Colour:
- RAL9005 (Black)
- Corner profiles and strips: RAL9005 (Black)
•Height: 9U
•Maximum load: with even distribution: 100kg
•Degree of protection: IP20
•Doors: Glass door of safety glass 4mm including lock and 2 keys. Door hinged on the right. Conversion to left hinged possible. Opening angle of the door: approx. 200°.
•Side panels: removable and lockable
•Rails: 19" rails (2 pieces) in the front of the cabinet, galvanised, depth-adjustable, U marking present. A second pair of 19” DTWPROFxx rails for rear mounting is available as an option. This is required for 4-point mounting of heavy installations.
•Cable entry options: in roof, floor and rear wall.
- The floor and rear panel are provided with a plastic blank cover.
- Roof is equipped with a sliding cable entry with rubber seal.
•Cooling:
- Passive cooling through ventilation slots and heat exchange with the outside area.
- Active cooling by optional DTLT fans, which are easily and quickly inserted into the roof from the outside. This can also be easily done out afterwards.
•Earthing: earthing set is included
•Accessories: Numerous accessories available (shelves, PDUs, cable management, blank panels, fan units, etc.)
•Delivery: Enclosure is completely assembled and delivered with assembly material
One-man installation: A special feature of the DTWB enclosure is the convenient and quick one-man installation.
In the first step, the rear panel is removed from the enclosure and only this panel is fixed to the wall. Afterwards, the enclosure is only hung into the back wall and fixed. These operations can easily be carried out by a single fitter on the building site.
•Material: Powder-coated steel sheet housing
•Material thickness:
•Colour:
•Height: 9U
•Maximum load: with even distribution: 100kg
•Degree of protection: IP20
•Doors: Glass door of safety glass 4mm including lock and 2 keys. Door hinged on the right. Conversion to left hinged possible. Opening angle of the door: approx. 200°.
•Side panels: removable and lockable
•Rails: 19" rails (2 pieces) in the front of the cabinet, galvanised, depth-adjustable, U marking present. A second pair of 19” DTWPROFxx rails for rear mounting is available as an option. This is required for 4-point mounting of heavy installations.
•Cable entry options: in roof, floor and rear wall.
•Cooling:
•Earthing: earthing set is included
•Accessories: Numerous accessories available (shelves, PDUs, cable management, blank panels, fan units, etc.)
•Delivery: Enclosure is completely assembled and delivered with assembly material
| EAN-Code | 9004840916621 |
|---|---|
| Net width | 600,00mm |
| Net height | 512,00mm |
| Net weight | 17,60kg |
| Netto depth | 450,00mm |
| Min. ambient temperature | 5°C |
| Max. ambient temperature | 40°C |
| Colour | RAL 9005 (black) |
| IP Rating | IP20 |
| Max. load | 100kg |
| Series | S-RACK |
| Manufacturer | Schrack |
| Suitable for HU | 9U-500mm |
| HU | 9 |
| - | Sommeroffer |
| Packaging units | 1 pcs |
Foreign Keywords:
Panel, Cat, PC,
