Mainly used in offices and office-like environments, such as flats, single-family homes, etc. Suitable as a central distributor in small to medium-sized network installations, but also for use as a floor distributor (sub-distributor) in the horizontal area of structured cabling. The removable side panels allow convenient access to the installed components, even afterwards. For active cooling of the built-in components, optional DTLT fan units with one or two fans can be mounted in the roof.

•Material: Powder-coated steel sheet housing
•Material thickness:
- Top and bottom chassis: 1.0mm
- Corner profile: 1.0mm
- Rails: 1.5mm
- Front door (glass): 4.0mm
- Rear panel: 1.0mm
- Side panel: 0.8mm
•Colour:
- RAL7035 (light grey)
- Corner profile and rear panel: RAL5005 (signal blue)
•Height: 4U
•Maximum load: With even distribution: 80kg
•Degree of protection: IP20
•Doors: Glass door of safety glass 4mm including lock and 2 keys. Door hinged on the right. Conversion to left hinged possible. Opening angle of the door: approx. 200°.
•Side panels: removable and lockable
•Rails: 19" rails (2 pieces) in the front of the cabinet, galvanised, depth-adjustable
•Cable entry options: in roof and floor
- The floor is provided with a plastic blank cover.
- The roof is equipped with a brush entry.
•Cooling:
- Passive cooling through ventilation slots and heat exchange with the outside area.
- Active cooling by optional DTLT fans, which are easily and quickly inserted into the