SCHRACK-Info
Equipped with solid doors, passively vented plinth and a large routing chamber for structured network cabling, the IS-1 network cabinets are available with single and double wing doors. Easy cabling through the open base frame and cable entry apertures in the top cover. The frame and all cladding parts have a high-quality, robust powder coating.
Frame clearance at front: 112mm
Static load capacity: up to 18,000N
Material
Basic frame: 1.50mm steel sheet
Doors: 1.50mm steel sheet
Side panels: 0.75mm steel sheet
482.6mm (19") mounting angles: 2.00mm steel sheet
Glass: 3.00mm single pane safety glass
Finish
Frame and cladding parts: powder-coated
Internal fittings: galvanised
Equipment
Earthing in acc. with DIN VDE 0100-540
Components in acc. with IEC 297-1/2 (19")
Frame clearance at front: 112mm
Static load capacity: up to 18,000N
Material
Finish
Equipment
- 1 basic frame, demountable, with integrated 25-mm mounting hole pitch pattern on all sides
- 4 galvanised 482.6mm (19") mounting angles with square perforations at the front and sides for cage nuts in acc. with IEC 297 d EIA, incl. height unit pitch pattern and U-labelling
- 1 front door, steel sheet with 3mm single pane safety glass, swing handle and profile half cylinder (30/10), EK333 lock and 4- point locking system
- 1 rear door, steel sheet, solid, with swing handle and profile half cylinder (30/10), EK333 lock and 4- point locking system
- 2 side panels, screw-fastened, optional sash-fastener (only for cabinets with side panels, see table)
- 1 two-part top cover with knockouts at sides (not for width 600) and rear for cable entry and for up to 6 fans, rear cable entry knockout closed by brush strip
- 2 active fans with connector cable (only on ventilated network cabinets, see table)
- Open base frame
- 1 plinth, H 100mm, with passive venting (supplied loose with 47U racks)
- 4 levelling feet, incl. protective caps
| EAN-Code | 4051273602176 |
|---|---|
| Packaging units | 1 pcs |
Foreign Keywords:
Schäfer-IT, iQdata; Rechenzentrum
