HRC Outgoing field 1042 mm, 800 A, 50x10 busbar system

Article #: ILT40800-A

Quantity:

Sales Unit:

Minimum Quantity:

On Request

SCHRACK-Info

General: Type-tested Modul 2000TT outgoing fields for HRC in-line fuse switches up to 630A
Material:

Made of sheet steel and equipped with M8 threaded bolts for earthing. Enclosures in widths 602mm and 822mm are single door versions, enclosures in widths 1042mm and 1242mm are double door versions
On single door enclosures, the door is mounted on three double-sided hinges for right-hand opening (=hinged right). On double door enclosures, hinges are not reversible, the left door wing is locked separately with an inner three-point lock

Lock: Three-point rod lock with swing handle (without lock insert), does not slide inward. The standard lock can be exchanged for profile half cylinders (DIN cylinders) from the range of accessories. Double doors are designed with a left-side inner pivot lever
Roof:

Two cut-outs for cable entries at widths 602mm and 822mm, three cut-outs at width 1042mm and four cut-outs at width 1242mm
Gland plates from our accessories are required for completion

Side cut-out: Contacting possibility for the main busbar. 1 PU (=2 pieces) side covers IL920001 per enclosure is necessary
Baying kit: A baying kit for baying a second Modul 2000TT enclosure is included
Plinth: 100mm high with cable entry options on the sides. Optionally it is possible to stack two 100mm high plinths on top of each other
Protection class: I
Degree of protection: Standard IP31 up to 1250A, without door it’s possible up to 1600A, with corresponding components from our accessories (exhaust filter, gland plates and plinths) IP54 is possible up to 1250A
Impact resistance: IK10
Finish: Textured powder coating

Delivered on an Euro-pallet