An essential feature of these Power Distribution Homecabinets is their Felxibility, their Modularity and the Combinability with the SCHRACK Data Homecabinets DW4HD.

Flexibility: The Homecabinets are typically designed for surface mounting. For flush mounting the Combiframes DW4HR are available.

Modularity: The Homecabinets are available in 3 heights of 166, 333 and 500mm. Cabinet width (500mm) and cabinet depth (110mm) are the same in all dimensions. The dimensions of the Power Distribution Homecabinets are exactly the same as with the Data Homecabinets.

Combinability: A Power distribution Homecabinet and a Data Homecabinet can be mounted side-by-side (up / down) by use of the baying-kit DW4HZAK1. Break-out cable-entries are provided. Because of the modularity, e.g. a 333mm high Power Distribution Homecabinet (DW4HE222) an a 166mm high Data Homecabinet (DW4HD108) can be connected. For flush mounting, the 500mm high combiframe (DW4HR3) is used.

Break-out cable entries are available on top, bottom and both sides od the Homecabinets available. Thus the camposition of larger groups of this Homecabinets series is possible.

Removable door: The hinges allow a quick and easy demounting of the door.

• In-door
• The Homecabinets can be installed on the wall (Wallmount, WM) or in a prepared recess in a wall (Flushmount, FM) using standard construction methods.

• Welded frame from 1.0mm sheet steel combined with plastic PEHD 8.0mm.
• Door from 1.0mm steel.

• RAL9003 - Signalwhite

• IP20

• Homecabinet: 20kg
• Door: 2kg

• Wallmount: Single or combined installation top / bottom or left / right
• Flushmount: Single or combined installation top / bottom. Everytime a combiframe has to be used.

• Baying-kit DW4HZAK1.

• To Data Homecabinets, Series DW4HD.

• Main earthing-point M8 on the bottom part of the Homecabinet.
• The door of the Homecabinet is connected by an earthing wire to the frame.

• All parts are made from recyclable materials.